Attention, please! General fastener product spot check, 4 bolts and screws are unqualified!

Release time:

2020-12-18

Core reminder: The Guangdong Provincial Market Supervision Administration has carried out a spot check on the quality of general fastener products in Guangdong Province. The spot check task is undertaken by the Jieyang City Quality Measurement Supervision and Inspection Institute of Guangdong Province.

Attention, please! General fastener product spot check, 4 bolts and screws are unqualified!

Spot check ● General fasteners in Guangdong Province

In accordance with the "the People's Republic of China Product Quality Law", "Interim Measures for the Administration of Product Quality Supervision and Spot Check", "Guangdong Province Product Quality Supervision Regulations" and other relevant regulations, the Guangdong Provincial Market Supervision Administration has carried out the Guangdong Province General Fastener Product Quality Supervision and Spot Check, and the sampling task is undertaken by Guangdong Jieyang City Quality Measurement Supervision and Inspection Institute. The relevant information is hereby announced as follows:

This time, a total of 60 general-purpose fastener products produced by 36 companies were supervised and spot-checked, involving 7 cities in our province, including Guangzhou, Shenzhen, Shantou, Foshan, Huizhou, Dongguan, and Jieyang. After inspection, it was found that 4 products produced by 3 enterprises were unqualified. The unqualified items mainly include: "minimum tensile load" and "hardness".

1. minimum tensile load:

This spot check to determine 2 products qualified. The minimum tensile load is one of the most important mechanical properties of general fasteners, and its failure may lead to failure or even fracture of the product during normal use, resulting in equipment damage and even casualties. The list of unqualified products for the minimum tensile load item is shown in Table 1.

jzz

2. hardness:

This spot check determined that 3 products were unqualified. Hardness is one of the mechanical properties of general fasteners. Different product performance levels have different hardness requirements. The hardness is not up to standard, so that the product can not meet the design requirements, there is a risk of failure. See Table 2 for the list of unqualified products for hardness items.

jzz

For the producers and sellers of unqualified products found in this spot check, the Guangdong Provincial Market Supervision Administration will instruct the relevant prefectural and municipal market supervision administrations to follow the provisions of the the People's Republic of China Product Quality Law, the Interim Measures for the Administration of Product Quality Supervision and Spot Check, and the State Market The relevant regulations of the General Administration of Supervision and Administration and the Guangdong Provincial Market Supervision Administration on supervision and random inspections shall do a good job of post-processing.

The first is to order producers to stop producing and selling the same supervised overall product, to conduct a comprehensive clean-up of inventory products, to correct the sold products within a time limit and to proactively publish relevant information;

The second is to notify the seller to stop selling products of the same model;

Third, the products to be re-marketed after rectification need to be replaced with product packaging or marked with a product qualification commitment;

Fourth, the market supervision department shall implement regular follow-up and spot checks on the products that promise to be rectified and qualified;

Fifth, the unqualified products and their producers and sellers shall be recorded in the quality supervision credit file, and the credit classification supervision shall be implemented.

(Reprint source: golden spider fastener web)