Kalo Salvi Launches New Molding Machine-Model CS 558 WS

Release time:

2020-11-04

Kalo Salvi Launches New Molding Machine-Model CS 558 WS

Core Tip: Italy's Carlos Salvi Joint Venture Co., Ltd. (Carlo Salvi SpA) is a world-renowned designer and manufacturer of molding machines.

jzz

Carlo Salvi SpA is a world-renowned designer and manufacturer of molding machines, starting with the initial wire drawing machines and moving on to the production of screws, semi-and fully hollow rivets, bolts, special fasteners and very complex parts.

　　Devices can be divided into three main families:
? One-die two-punch forming machine
? Two-die four-punch forming machine
? Multi-station forming machine

This model five-mode multi-station series equipment can handle wire diameters from 4mm to 12mm. The wire diameter is 10mm when using titanium or other special alloys.

The machine is specially developed for the production of parts with extremely complex shapes. Each station is equipped with a P.k.o, and each P.k.o can be adjusted independently of the other P.k.o. The machine can produce solid parts, half hollow parts and full hollow parts.

jzz

Carlo Salvi has developed a new model called CS 558 WS, which is an enhanced version of the CS 558 machine. The new model is equipped with a preheating system to process some materials that cannot be molded in a cold forming system, such as titanium and superalloys.

The customer can install a heating system with coils on the mold holder of the molding machine number CS 558 WS at his discretion, or install a resin-bonded inductor on his machine. If there are special production needs, you can evaluate whether to install the above two inductors at the same time.

The machine has been specially developed to minimize conversion time. Its technology and speed can be beneficial not only for large batch operation, but also for small batch operation.

Technical data of the forming machine CS 558 WS:

jzz

　The main standard features of the device are:
-Electronic regulation of feed and stop
-All punches with male die ejection device
-4th and 5th lower die belt trimming station
-Electric lift/landing conversion unit
-Display of punching needle position in lower die
-50 kW induction heating

jzz

　The optional features on the CS 558 WS are:
-Quick change kit:
-Workbench with all centering fixtures
-Additional cutter unit
-Attach complete male mold holder assembly
-Other complete female mold base assembly
-Additional camshaft with opening/closing clamp
-Additional 5 conveying clamp units
-Hanger for handling die and punch modules

jzz

The molding machine CS 558 WS can further expand some optional items, such as Secomea equipment, for remote assistance.

With this high-performance solution, no matter where we are, we can monitor, manage and repair the machine according to the requirements of the industrial 4.0.

Since the device points directly to the Site Manager server via Internet access via LAN, Wi-Fi or mobile phone (the latter is optional), there is no need for firewall configuration and no public IP, thus ensuring maximum security of the customer company network.

2024-01-08

2023 steel industry profits close to historical bottom 2024 part of the market demand to good, the overall operating pressure is still large

2024-01-05

Green revolution in the fastener industry: the rise of environmentally friendly materials and sustainable production

2023-12-22

2024 domestic and foreign fastener exhibition schedule (worthy of collection)

2023-12-15

Successful implementation of MES production management system to help enterprises realize digital transformation

2023-11-15